The MR-1000 Meeting Rail Processor is an automated end mill fabricating machine with a servo-controlled infeed. Lineals are cut to length using a 90 degree saw and each end is profiled with a cutter stack. The material is fabricated based on the cut files that may be manually entered, loaded by USB jump drives, or downloaded via an available network connection.

Features:

• Estimated Machine Cycle time: 15-20 seconds cut to cut
• Cut length Tolerance: ±0.015
• Fabrication Tolerance: ±0.010
• Ergonomic working height, fine adjustments made via leveling feet
• One 90 degree saw assembly equipped with a 3 HP motor and 16” carbide tipped saw blade
• Heavy duty powder coated steel frame
• Equipped with a 4hp (3400rpm) motor for cutter stack
• Saw/motor carriage rides on precision ground rails and linear bearings
• Saw/motor pneumatically activated by Air/Oil cylinders
• Flow controlled saw and end mill stroke
• 1/2” Filter/Regulator with OSHA compliant lockout/tagout
• Coalescing air filter
• Infeed
  • Servo controlled Infeed accommodates 16’ lineal
  • Left to Right or Right to Left feed orientation
  • Thru-Beam photo eyes for mill length detection
• Electrical: 240V AC(20A – 3 Phase) or 480V AC(15A – 3 Phase)
• Fusible disconnect with OSHA compliant lockout/tagout
• Controls – combined PC + PLC control system
• Networkable
• Production data can be downloaded using JMC CSV file format