DM 4590

The DM-4590 is a double miter saw with two adjustable saw assemblies fixed on a linear ballscrew to accommodate cut lengths from 14 to 144 inches with the saws set at 90 degrees. Each saw head has an adjustable cutting angle capable of cutting 45 to 90 degrees. The cut length is adjusted by moving the out-feed saw assembly via a handwheel to the appropriate cut size displayed on a digital LED. The material is cut between saw blades for ensured cut length accuracy.

Features:

  • Estimated Cycle time: per cycle 7-10 seconds per cycle
  • Available in Left to Right feed orientation only
  • Cutlength Tolerance: ±0.015
  • Ergonomic working height (38-1/2”), fine adjustments made via leveling feet
  • Heavy duty machined, powder coated, tubular steel frame
  • 1/2” Filter/Regulator with OSHA compliant lockout/tagout
  • Coalescing air filter
  • Machine lubrication - Grease fittings at each linear bearing
  • Saws - One 45 to 90 degree saw on a fixed head
    • Angle of saw manually adjustable
    • Equipped with a 3hp (3450rpm) motor equipped
    • Cuts with a 16” carbide tipped saw blade
  • Saws - One 45 to 90 degree saw on a moving head
    • Head moves to desired position via manual ballscrew, rides on precision ground rails and linear bearings
    • Angle of saw manually adjustable
    • Equipped with a 3hp (3450rpm) motor equipped
    • Cuts with a 16” carbide tipped saw blade
  • Saw carriages ride on precision ground rails and linear bearings
  • Saws are pneumatically activated by Air/Oil cylinders
  • Manually adjustable flow control for saw stroke
  • Includes saw shrouds with vacuum ports
  • Saws guarded by pneumatically actuated sheet metal on fixture side
  • Electrical: 240V AC (20A – 3 Phase) or 480V AC (15A – 3 Phase) hookup
  • Fusible disconnect with OSHA compliant lockout
  • Controls – PLC control system
  • Electrical two hand tie down for machine operation