NS 4590NC

The NS-4590NC is similar to the NS-4590 notch saw. However, the NS-4590NC is equipped with two independent saw carriages to fabricate profiles, which requires not only controlled horizontal movement of the saw carriages, but controlled vertical movement for extended 45 degree cuts.

NS_4590_NC

Features:

  • Estimated cycle time: 15-20 seconds per cycle
  • Fabrication Tolerance: ±0.010
  • Standard 30” material support on front of machine
  • Ergonomic working height (from 36-1/2” to 42”), fine adjustments made via leveling feet
  • Heavy duty powder coated steel frame
  • Scrap exits at rear of machine
  • 1/2” Filter/Regulator with OSHA compliant lockout/tagout
  • Coalescing air filter
  • Machine lubrication - Grease fittings at each linear bearing
  • One 45 degree saw
    • Equipped with a 1 ½ hp (3450rpm) motor
    • Cuts with a 12” carbide tipped saw blade
  • One 90 degree saw
    • Equipped with a 1 ½ hp (3450rpm) motor
    • Cuts with a 12” carbide tipped saw blade
  • Saw carriage rides on precision ground rails and linear bearings
  • Pneumatically activated by Air/Oil cylinder
  • Manually adjustable flow control on saw strokes
  • Electrical: 240V AC (20A – 3 Phase) or 480V AC (15A – 3 Phase) hookup
  • Fusible disconnect with OSHA compliant lockout/tagout
  • Controls – PLC control system
  • Electrical foot pedal activation